Paradyne ACCULINK 336x E1 - Manual (Page 165)

Index
Index-3 3360-A2-GB20-20 December 1996
Gen (General) Configuration branch
example of use, 3-34–3-35
in the menu tree, A-1
option table, C-12
option worksheet, C-23
H
HDB3 (High Density Bipolar 3) coding
configuration option, C-2
Self-Test Health message, 4-2
HDSL (High bit-rate Digital Subscriber Line) branch
example of use, 4-5
in the menu tree, A-1
HDSL network. See network interface
I
ID (Identity) branch
example of use, 3-8
in the menu tree, A-1
indicators. See LEDs, front panel
IP (Internet Protocol) addressing
configuration option, C-18, C-19, C-20
example of use, F-1–F-2
procedure for configuring, 3-15–3-16, 3-19–3-20
K
keypad
operation, 3-3–3-4
physical description, 1-3, 3-2
L
lamp test, 4-24–4-25
LAN Adapter, 1-2, 1-5, 2-3, 2-4, 3-14, F-1
LED Control branch
example of use, 3-11
in the menu tree, A-1
LED Status branch
example of use, 3-10
in the menu tree, A-1
LEDs, front panel
during power-up self-test, 2-9
functional description, 3-4–3-7
lamp test, 4-24–4-25
physical description, 1-3, 3-2
line coding, C-2
line loopback (LLB), 4-17
link layer protocol, 3-14, 3-16
link trap, 4-11
liquid crystal display (LCD)
failure message, 4-2
functional description, 3-3
physical description, 1-3, 3-2
LOF (Loss Of Frame) condition
front panel LED indication, 3-5, 3-6
Performance Report message, 4-8
LOFC (Loss Of Frame Count) report, 4-9
loopback
front panel LED indication, 3-5
local, 4-16–4-21
abort, 4-20–4-21
data channel loopback (DCLB), 4-19
data terminal loopback (DTLB), 4-20
DTE loopback (DLB), 4-18, C-2, D-2
line loopback (LLB), 4-17
payload loopback (PLB), 4-17
repeater loopback (RLB), 4-18–4-19
remote, 4-15
LOS (Loss Of Signal) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-3
front panel LED indication, 3-5, 3-6
Performance Report message, 4-8, 4-9
Self-Test Health message, 4-2
troubleshooting, 4-12
Lpbk (Local Loopback) branch
example of use, 4-16–4-21
in the menu tree, A-1
M
maintenance
device health and status, 4-3–4-4
HDSL loop performance, 4-5
performance reporting, 4-6–4-9
power-up self-test, 2-9, 4-2
manager, SNMP, 1-2
menu tree, A-1
messages
alarm
Device Health and Status, 4-3
Performance Report, 4-8
Self-Test Health, 4-2
troubleshooting, 4-12
with ASCII terminal/printer, 1-2, 4-10
status
Device Health and Status, 4-3
HDSL loop performance, 4-5
Performance Report, 4-8
Self-Test Health, 2-9, 4-2
Test Status, 4-25–4-26
MFA (Multiframe Alarm) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-4
MIBs, SNMP. See SNMP, MIBs
model numbers, H-1