Paradyne ACCULINK 336x E1 - Manual (Page 167)

Index
Index-5 3360-A2-GB20-20 December 1996
Reset branch
example of use, 3-36
in the menu tree, A-1
Rlpbk (Remote Loopback) branch
example of use, 4-15
in the menu tree, A-1
RMA (Remote Multiframe Alarm) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-4
router applications, 2-2
RS-449 interface, D-8
RX network connector, 1-5
RX shield, 1-5
S
secondary clock
configuration option, C-12
functional description, 3-33
self-test
displaying results, 4-2
front panel indications, 2-9, 3-5
troubleshooting, 4-12
Send Ones configuration option, C-2, C-4
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 3-14, F-1
SES (Severely Errored Seconds) report, 4-8
shield, RX, 1-5
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-14–3-20
menu tree branches, A-1
option table, C-17–C-22
option worksheet, C-28
connection examples, 2-3–2-4, 2-8, F-1–F-2
database, 1-2
IP addressing, F-1–F-2
manager, 1-2
MIBs
functional description, 1-2
list of objects, E-1–E-19
procedure for configuring access, 3-17–3-18
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-13
traps
functional description, 1-2, 4-11
procedure for configuring, 3-18–3-20
specifications, environmental, B-1, B-2
Stat (Status) branch
examples of use, 3-8, 3-10, 4-2, 4-3, 4-5, 4-6, 4-25
in the menu tree, A-1
status messages. See messages, status
STest (Self-Test Health) branch
example of use, 4-2
in the menu tree, A-1
StEvnt (Status Event) report, 4-9
straps. See configuration options
subnet, 3-14, C-18, C-19, C-20, F-1
switch, rear panel, 1-4, 1-5
synchronous data port. See PORT (1–4) interface
T
technical specifications, B-1
temperature
operating, B-2
storage, B-2
Test branch
example of use, 4-15–4-26
in the menu tree, A-1
test commands, 4-15–4-26
front panel LED indications, 3-5
lamp test, 4-24–4-25
local loopback, 4-16–4-21
abort, 4-20–4-21
data channel loopback (DCLB), 4-19
data terminal loopback (DTLB), 4-20
DTE loopback (DLB), 4-18
line loopback (LLB), 4-17
payload loopback (PLB), 4-17
repeater loopback (RLB), 4-18–4-19
remote loopback, 4-15
test messages, 4-25–4-26
test patterns, 4-21–4-24
test jacks
functional description, 4-14
physical description, 1-3, 3-2, 3-4
time-slot 16 (TS16)
channel allocation, 3-20, 3-21, 3-22
configuration option, C-8
timing. See clocking
traps, SNMP. See SNMP, traps
troubleshooting
device health, 4-3–4-4
diagnostic table, 4-12–4-13
HDSL loop performance, 4-5
performance, 4-6–4-9
power-up self-test, 2-9, 4-2
TStat (Test Status) branch
example of use, 4-25–4-26
in the menu tree, A-1
TX network connector, 1-5