Patton electronic G.SHDSL INTEGRATED 3086 User Manual
Page 96
4 • Basic Application Configurations
Model 3086 G.SHDSL Integrated Access Device User Guide
96
DSLAM Connections with remote CPE units
Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
Click on G.SHDSL in the Configuration Menu > Configuration > verify that Terminal Type is Central
and Interface Type is atm. If changed, then click on
Configure
.
Click on Action > Select deactivate for Action > Click on the
Action
button.
2. On the Menu, go to Configuration, then to WAN Connections
Delete both default WAN services already defined.
Click on
Create a new service
in the main window, select
PPPoA Routed
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called PPPoA Routed.
Change the configuration parameters to match the following.
– Description:PPPoA Routed
– VPI:0
– VCI:800
– WAN IP Address:0.0.0.0
– LLC Header Mode:off
– HDLC Header Mode:off
– CHAP
– User Name:fred
– Passwood:fredspass
Click on
Configure
.