Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 85)

DSLAM Connections with remote CPE units 85
Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
Change the IP address so it is in the same subnet as the laptop PC. The laptop’s IP address is
192.168.172.229, so in this example, change the IP address of the 3086 to 192.168.172.3. The default IP
mask is 255.255.255.0.
fi ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
Click on G.SHDSL in the Configuration Menu > Configuration > verify that Terminal Type is Remote and
Interface Type is atm. If changed, then click on
Configure .