Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 88)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
88 DSLAM Connections with remote CPE units
4. Go to G.SHDSL in the Configuration Menu, then the submenu Status. The Modem State should be
“deactivated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to Start, then click on Action.
The modems should link up within 30 seconds or so and the link is ready for communication.
PPPoH Routed
Model 3086 (Remote) Configuration Steps (PPPoH Routed)
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
fi ip clear routes
fi pppoh clear transports