Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 189)

Frame Relay Network Interworking (FRF.5) 189
Model 3086 G.SHDSL Integrated Access Device User Guide F • Interworking Functions Information
Channel Level Information Screen
The Channel Level configuration section of the screen allows the user to setup and configure the individual
channels associated with the specified port. Note that in the screen show below only a single channel is avail-
able for configuration. This is because the port, shown above, is set to a MuxMode of one to one.
Packet Information Screen
The following screen capture shows the packet information that is available for each channel. Note that the
direction of the data is referenced to the ATM link. Thus Tx Data is data that is received on the Frame Relay
link and transmitted out the ATM Link.