beautypg.com

Pppoa bridged (rfc 2364) configuration – Patton electronic G.SHDSL INTEGRATED 3086 User Manual

Page 79

background image

DSLAM Connections with remote CPE units

79

Model 3086 G.SHDSL Integrated Access Device User Guide

4 • Basic Application Configurations

PPPoA Bridged (RFC 2364) Configuration
The user data for transmission is in the form of IP packets but encapsulated in a PPP packet, transmitted and
received through a PPP session to the connection. The PPP packets are encapsulated according to RFC 2364 for
transmission over the ATM link. The packets are de-encapsulated on the receive side so that the IP data can be
delivered to the end user.

Model 3086 (Remote) Configuration Steps (PPPoA Bridged)

From the command line interface (CLI) via the RS-232 control port,

fi

ip list interfaces

One IP interface is called ip1 with an IP address of 192.168.1.1

Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.2

fi

ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0

1. Now you can bring up the web-page management system on your browser by entering the IP address of

the 3086.

2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services

already defined.

Click on

Create a new service

in the main window, select

PPPoA_Bridged

and click on the

Configure

button.

In the Description field, enter the description you wish. In this example, it is called PPPoA Bridged.