Patton electronic G.SHDSL INTEGRATED 3086 User Manual
Page 74
4 • Basic Application Configurations
Model 3086 G.SHDSL Integrated Access Device User Guide
74
DSLAM Connections with remote CPE units
Model 3086 (Remote) Configuration Steps (RFC 1483 Bridged)
From the command line interface (CLI) via the RS-232 control port,
fi
ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.2
fi
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
RFC_1483_Bridged
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called RFC 1483 B.
Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on
Apply
.
3. Go to
G.SHDSL
in the Configuration Menu, then the submenu
Configuration
.