Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 61)

TDM Plus Ethernet Traffic 61
Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
figuration option”. Use the drop down menus to enter the required configuration. Once all settings have been
selected, click on the
Configure button at the bottom of the screen.
Circuit ID
User can enter up to 30 alphanumeric characters for circuit identification
Clear Error Counters
Selecting “Clear” will reset the error counters displayed in the “Status” screen.
Intended DSL Data Rate
This is the DSL line rate at which you wish to connect. In a point-to-point deployment, the unit designated as
“Central” will impose the line rate on the unit designated as “Remote”. The model 3086 offers nx64 kbps
speeds from 192 kbps to 4.6 Mbps.
Actual DSL Rate
This field displays the DSL rate connection; it displays the payload rate plus 8kbps automatically assigned to a
DSL management channel. For instance, if a DSL rate of 1984 kbps is selected in the “Intended DSL Data
Rate” window, the actual DSL data rate field will display 1992 kbps, this corresponds to 1984 kbps payload
plus 8 kbps management channel.