Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 112)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
112 DSLAM Connections with remote CPE units
3. Returning to the 3086 Configuration Menu, click on Configuration, then IP Routes.
Click on “Create new Ip V4 Route.”
– Destination:0.0.0.0
– Gateway:192.168.164.2
– Mask:0.0.0.0
– Cost:1
– Interface:[leave blank]
Click on OK .
4. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote.
Change Interface Type to hdlc. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action .
Return to Action, select Start and click on Action .