Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 102)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
102 DSLAM Connections with remote CPE units
3. In the Configuration Menu, click on Configuration then > WAN Connections > Edit (for the WAN Ser-
vice ppp1) > Edit ‘PPP’ and verify or change the following parameters on the Edit PPP webpage.
Parameters in red italics are those requiring changes from the default configuration.
– Server: true
– Create Route: true
– Specific Route: false
– Subnet Mask: 0.0.0.0
– Route Mask: 0.0.0.0
– Hdlc: false
– LLC: false
– Lcp Max Configure: 10
– Lcp Max Failure: 5
– Lcp Max Terminate: 2
– Dialin Auth: pap
– Dialout Username: [blank]
– Dialout Password: [blank]
– Confirmation Password: [blank]
– Dialout Auth: none
– Interface ID: 2
– Remote IP: 192.168.164.3
– Local IP: 192.168.164.2
– Magic Number: 0
– MRU: 0