Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 70)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
70 Using the 3086 in Routed or Bridged applications
4. Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create the gateway to the remote
3086 by entering the WAN IP address of the remote 3086, in this example, enter 192.168.164.3 in the
Gateway field > OK
The other fields should be:
– Destination: 0.0.0.0
– Gateway: 192.168.164.3 [already configured in first part of step 4).]
– Mask: 0.0.0.0
– Cost: 1
– Interface: [blank]