Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 191)

Frame Relay (Ethernet Based) Operations 191
Model 3086 G.SHDSL Integrated Access Device User Guide F • Interworking Functions Information
• Port: This variable defines the low layer port that will be used to transport data across the frame relay inter-
face. For routed application the “frf” port should be used. For bridged applications the “fr” port should be
used.
• DLCI: This variable can be set to any positive value less than 8196
Clear all Frame Relay Transports
Command: framerelay clear transport
This command can be used to clear all of the transports in the system
Delete the specified transport
Command: framerelay delete transport
Delete a single frame relay connection using either the connection name or number
• name: the name used when creating the transport
• number: the ID number found when listing the transports
List all active Frame Relay Channels
Command: framerelay list transports
List all transports currently defined in the system
Set configuration variables for the specified frame relay transport
Command: framerelay set transport
Set a value for a specific frame relay variable
1. name | number: specify the connection that you would like to change
2. variable: any variable from the above list
3. value: value that you would like to set
Show detailed configuration information on the specified channel:
Command: framerelay show transport
Display specific information about the frame relay connection