Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 161)

Serial port 161
Model 3086 G.SHDSL Integrated Access Device User Guide D • Physical Connectors
Serial port
V.35 (M/34 Connector)
V.35 (DB-25 Female Connector)
Pin # Signal
A GND (Earth Ground/Shield)
B SGND (Signal Ground)
D CTS (DCE Source)
E DSR (DCE Source, Always On)
F CD (DCE Source)
L LL (Local Loop, DTE Source)
M TM (Test Mode Indicator, DCE Source)
N RL (Remote Loop, DTE Source)
P TD (Transmit Data +, DTE Source)
R RD (Receive Data +, DCE Source)
S TD/ (Transmit Data -, DTE Source)
T RD/ (Receive Data -, DCE Source)
U XTC (Transmit Clock +, DTE Source)
V RC (Receiver Clock +, DCE Source)
W XTC/ (Transmit Clock -, DCE Source)
X RC/ (Receiver Clock -, DCE Source)
Y TC (Transmitter Clock +, DTE Source)
AA TC/ (Transmitter Clock -, DTE Source)
KK Aux. Power Input (+5VDC @ 300mA)
Pin # Signal
1 FG (FrameGround)
2 TD (Transmit Data-A, DTE Source)
3 RD (Receive Data-A, DCE Source)
4 RTS (Request to Send-A, DTE Source)
5 CTS (Clear to Send-A, DCE Source)
6 DSR (Data Set Ready-A, DCE Source)
7 SGND (Signal Ground)
8 CD (Carrier Detect-A, DCE Source)
9 RC/ (Receiver Clock-B, DCE Source)
10 CD/ (Carrier Detect-B, DCE Source)
11 XTC/(External Transmitter Clock-B, DTE Source)
12 TC/(Transmitter Clock-B, DTE Source)
13 CTS/(Clear to Send-B, DCE Source)