Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 76)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
76 DSLAM Connections with remote CPE units
Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on Apply .
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote, but change Interface Type to atm. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate , then click on Action .
Return to Action, select Start and click on Action .
PPPoH Bridged Configuration
Model 3086 (Remote) Configuration Steps (PPPoH Bridged)
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1 Change the IP address so it is in the same sub-
net as both PCs. For example, to 192.168.100.2
fi ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
2. On the Menu, go to Configuration , then to WAN Connections. Delete the factory default WAN services
already defined.