Patton electronic G.SHDSL INTEGRATED 3086 User Manual
Page 93
DSLAM Connections with remote CPE units
93
Model 3086 G.SHDSL Integrated Access Device User Guide
4 • Basic Application Configurations
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
Click on G.SHDSL in the Configuration Menu > Configuration > verify that Terminal Type is Central
and Interface Type is hdlc. If changed, then click on
Configure
.
Click on Action > Select deactivate for Action > Click on the
Action
button.
2. On the Menu, go to Configuration, then to WAN Connections.
Delete both default WAN services already defined.
Click on
Create a new service
in the main window, select
PPPoH_Routed
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called PPPoH Routed.
– Description:PPPoH Routed
– Interface:1
– WAN IP address: 192.168.164.3
– LLC Header Mode:off
– HDLC Header Mode:ON
– No authentication
– Username:[blank]
– Password:[blank]
Click on
Configure
.