Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 84)

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide
84 DSLAM Connections with remote CPE units
The other fields should be:
– Destination:0.0.0.0
– Gateway:192.168.164.3
– Mask:0.0.0.0
– Cost:1
– Interface:[blank]
4. Go to G.SHDSL in the Configuration Menu, then the submenu Status. The Modem State should be
“deactivated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to Start , then click on Action .
Model 3086 (Central) Configuration Steps (RFC 1483 Routed)
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
fi pppoh clear transports
One IP interface was called ip1 with an IP address of 192.168.1.1