Viewing transparent bridging statistics – Panasonic 470 User Manual
Page 79
Viewing system statistics
79
Item
Description
SQE Test Errors
The number of times that the SQE TEST ERROR message is generated
by the PLS sublayer for a particular interface. The SQE TEST ERROR is
defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985, and its generation
is described in section 7.2.4.6 of the same document.
Deferred Transmissio
ns
The number of frames for which the first transmission attempt on a
particular interface is delayed because the medium is busy.
Single Collision
Frames
The number of successfully transmitted frames on a particular interface
for which transmission is inhibited by more than one collision.
Multiple Collision
Frames
The number of successfully transmitted frames on a particular interface
for which transmission is inhibited by a single collision.
Late Collisions
The number of times a collision is detected on a particular interface later
than 512 bit-times into the transmission of a packet.
Excessive Collisions
The number of frames for which transmission on a particular interface
fails due to excessive collisions.
2
In the upper-left hand corner, click on the unit number of the device
to monitor.
The table is updated with the information for the selected device.
3
To refresh the statistical information, click Update.
4
To update the statistical information, click Update, or click Back to
return to the Ethernet Errors page
—End—
Viewing transparent bridging statistics
You can view the transparent bridging statistics measured for each
monitored interface on the device.
To view transparent bridging statistics:
Step
Action
1
From the main menu, choose Statistics > Transparent Bridging.
The Transparent Bridging page opens (
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.