Panasonic 470 - Manual (Page 41)

Displaying port statistics 41
Parameters and
variables
Description
Xtx Mirror packets transmitted on port X.
XrxOrXtx Mirror packets received or transmitted on port X.
XrxYtx Mirror packets received on port X and transmitted on port Y.
Note: Do not use this mode for mirroring broadcast and multicast
traffic.
XrxYtxOrXtxYrx Mirror packets received on port X and transmitted on port Y or
packets received on port Y and transmitted on port X.
Note: Do not use this mode for mirroring broadcast and multicast
traffic.
macaddr Enter the MAC address in format H.H.H.
Asrc Mirror packets with source MAC address A.
Adst Mirror packets with destination MAC address A.
AsrcOrAdst Mirror packets with source or destination MAC address A.
AsrcBdst Mirror packets with source MAC address A and destination MAC
address B.
AsrcBdstOrBsrcAdst Mirror packets with source MAC address A and destination MAC
address B or packets with source MAC address B and destination
MAC address A.
no port-mirroring command
The no port-mirroring command disables port mirroring. The syntax
of the no port-mirroring command is:
no port-mirroring
The no port-mirroring command is in the config command mode.
The no port-mirroring command has no parameters or variables.
Displaying port statistics
You can display the statistics for a port for both received and transmitted
traffic. This section covers:
• "show port-statistics command" (page 42)
• "clear-stats command" (page 43)
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.