Table 25 port-based monitoring modes – Panasonic 470 User Manual

Page 70

Chapter 4 Configuring network monitoring using Web-based management

Table 25 "Port-based monitoring modes" (page 70)

describes the

port-based monitoring modes.

Table 25
Port-based monitoring modes

Item

Description

Disabled

Choose this option to disable port-based monitoring.

The default setting is Disabled.

--> Port X

Choose this option to monitor all traffic received by port X.

Port X -->

Choose this option to monitor all traffic transmitted by
port X.

<-- --> Port X

Choose this option to monitor all traffic received and
transmitted by port X.

--> Port X or Port Y -->

Choose this option to monitor all traffic received by port
X or transmitted by port Y.

Note: Do not use this mode for multicast and broadcast
traffic.

--> Port X and Port Y -->

Choose this option to monitor all traffic received by port X
(destined to port Y) and then transmitted by port Y (one
way conversation steering).

Note: Do not use this mode for multicast and broadcast
traffic

<-- --> Port X and Port Y <-- -->

Choose this option to monitor all traffic received by port
X and then transmitted by port Y or transmitted by port X
and received by port Y (two way conversation steering).

Note: Do not use this mode for multicast and broadcast
traffic

Selecting any one of the address-based monitoring modes activates
the Address A and Address B screen fields, where you can specify
MAC addresses to monitor.

Nortel Ethernet Switch 460/470

Configuration — System Monitoring

NN47210-503

01.01

Standard

3.7

22 February 2007

Nortel Networks Confidential