Panasonic 470 User Manual
Page 20
20
Chapter 1 Network monitoring
Figure 4
Address-based mirroring configuration example
In this configuration, the designated monitor port (port 23) can be set to
monitor traffic in any of the following modes:
•
Monitor all traffic transmitted from address A to any address.
•
Monitor all traffic received by address A from any address.
•
Monitor all traffic received by or transmitted by address A.
•
Monitor all traffic transmitted by address A to address B.
•
Monitor all traffic between address A and address B (conversation
between the two stations).
Figure 5 "Port Mirroring Configuration address-based screen example"
(page 21)
shows the Port Mirroring Configuration screen setup for this
example.
In this example, port 23 becomes the designated Monitor Port for Switch S1
when you press Enter in response to the [Yes] screen prompt.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.