Table 3 monitoring modes, Table – Panasonic 470 User Manual
Page 24
24
Chapter 1 Network monitoring
Field
Description
Indicates the MAC addresses that is monitored by the designated
port monitor when one of the address-based monitoring modes is
selected. This port is monitored according to the value of Address
A in the selected Monitoring Mode field (see
).
Default Value:
00-00-00-00-00-00 (no MAC address assigned)
Address A
Range:
00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Indicates the MAC addresses that is monitored by the designated
port monitor when one of the address-based monitoring modes is
selected. This port is monitored according to the value of Address
B in the selected Monitoring Mode field (see
).
Default Value:
00-00-00-00-00-00 (no MAC address assigned)
Address B
Range:
00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Table 3 "Monitoring modes" (page 24)
describes the various monitoring
modes available from the Port Mirroring Configuration screen.
Table 3
Monitoring modes
Field
Description
Port-based:
Disabled
Default value for this feature.
-> Port X
Monitor all traffic received by Port X.
Port X ->
Monitor all traffic transmitted by Port X.
<-> Port X
Monitor all traffic received and transmitted by Port X.
-> Port X or Port Y ->
Monitor all traffic received by Port X or transmitted by
Port Y.
Note: Do not use this mode for broadcast or multicast
traffic.
-> Port X and Port Y ->
Monitor all traffic received by Port X (destined to Port Y)
and then transmitted by Port Y.
Note: Do not use this mode for broadcast or multicast
traffic
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.