Panasonic 470 - Manual (Page 59)

Graphing port statistics 59
Field Description
OutErrors For packet-oriented interfaces, the number of outbound
packets that were not transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not
be transmitted because of errors.
InUnknownProtos For packet-oriented interfaces, the number of packets
received through the interface that were discarded
because of an unknown or unsupported protocol.
For character-oriented or fixed-length interfaces
that support protocol multiplexing, the number of
transmission units received through the interface
that were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter is always 0.
Ethernet Errors tab for graphing ports
The port Ethernet Errors tab shows port Ethernet Errors statistics.
To open the Ethernet Errors tab for graphing:
Step Action
1 Select the port or ports you want to graph.
To select multiple ports, [Ctrl] + left-click the ports that you want to
configure. A yellow outline appears around the selected ports.
2 Do one of the following:
• From the Device Manager main menu, choose Graph > Port.
• From the shortcut menu, choose Graph.
• On the toolbar, click Graph.
The Port dialog box for a single port or for multiple ports opens with
the Interface tab displayed.
3 Click the Ethernet Errors tab.
The Port Ethernet Errors tab ( Figure 19 "Graph Port dialog box --
Port Ethernet Errors tab" (page 60) ) opens.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.