Panasonic 470 User Manual
Page 68
68
Chapter 4 Configuring network monitoring using Web-based management
The Port Mirroring page opens (
Figure 22 "Port Mirroring page"
Figure 22
Port Mirroring page
Note: The Port Mirroring Active section of
displays only the port mirroring
configurations you set. If you set no port mirroring configurations,
the section does not display any rows.
Table 24 "Port Mirroring page items" (page 68)
describes the items
on the Port Mirroring page.
Table 24
Port Mirroring page items
Item
Range
Description
Monitoring Mode
(1) Disabled
(2) --> Port X
(3) Port X -->
(4)<-- --> Port X
(5) -->Port X or Port Y -->
(6) -->Port X and Port Y -->
(7) <-- --> Port X and <-- --> Port
Y
(8) Address A --> any Address
(9) any Address --> Address A
(10) <-- --> Address A
(11) Address A --> Address B
(12) Address A <-- --> Address
B
Choose any one of the six port-based
monitoring modes or any one of the five
address-based monitoring modes.
For more information on selecting one of
the six port-based modes that activates the
port X and port Y screen fields, where you
can choose up to two ports to monitor, see
Table 25 "Port-based monitoring modes"
(page 70)
.
For more information on selecting one
of the five address-based modes that
activates the Address A and Address
B screen fields, where you can specify
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503
01.01
Standard
3.7
22 February 2007
Copyright © 2005-2007, Nortel Networks
Nortel Networks Confidential
.