Pitney Bowes DM125 - Manual (Page 95)

7-9
7 • System Options
SV62276 Rev. A
Setting the Date, Time, and Timeouts (cont'd)
Setting Autodate Advance
The feature is factory set to 12:00 AM. This means that at 12:00 AM,
the system advances the date of the meter stamp to the new date.
You can set the system to advance the date of the meter stamp at
12:00 PM (afternoon) instead. With this setting, it allows you to meter
mail in the afternoon for the next day's mailing mail if your mail is
sent out in the morning.
1. Press
Options.
2. Press Page Down.
3. Select "Time and Timeouts".
4. Select "Autodate advance".
5. The following selections appear.
A. Switch AM/PM Use the soft key next to this selection to
toggle between "AM or "PM". Select "Continue".
B. Disable - Use the soft key next to this selection to disable the
feature and return to using 12:00 AM as the time when the
machine advances the date of the meter stamp.
6. The display returns to Time and Timeouts menu.
7. Press
Clear (back arrow key) to return to Options menu.
Basic Options