Pitney Bowes DM125 - Manual (Page 147)

10-5
10 • Maintenance
SV62276 Rev. A
Maintaining the Moistener
If you notice incomplete or poor sealing and the moistener tank is
full, you may need to clean the moistener brush or wick. If seal qual-
ity doesn't improve after cleaning, you can replace the moistener
brush or wick as needed.
1. Push down on the blue release lever on the moistener.
Removing and Cleaning the Moistener Brush
2. Pull the moistener straight out to the left.
Wick Brush
See Chapter 12, Supplies and Options for part numbers to order
these items for your machine.
Release
Lever