Pitney Bowes DM125 - Manual (Page 81)

6-17
6 • Adding Postage/Connecting to Data Center
SV62276 Rev. A
Selecting Tone/Pulse
Use this to tell the system whether you have a tone or pulse type phone.
1. Press
Options.
2. Press Page Down twice.
3. Select "Connect-Data Center".
4. Select "Phone Parameters".
5. Select "Tone/Pulse".
6. Select Tone or Pulse, whichever is appropriate. The display
shows the new setting.
7. Press Clear (back arrow key) to return to Data Center menu.
8. Press Clear (back arrow key) to return to Options menu.
Phone Parameters (for analog line connection to Data Center)
This menu option allows you to modify the phone connection settings
on your machine (tone or pulse, dial prefix, etc.) when using an ana-
log phone line to connect to the Pitney Bowes Data Center.
PHONE PARAMETERS
◄Modem Parameters
PHONE PARAMETERS
◄Tone/Pulse
◄Dialing Prefix
◄Change PbP Number
Entering the Dial Prefix
Use this if you need to dial a prefix number (like 9) to get an outside
line.
1. Press
Options.
2. Press Page Down twice.
3. Select "Connect-Data Center".
4. Select "Phone Parameters".
5. Select "Dialing Prefix".
6. Key in the prefix number you want (such as a "9").
7. Select "OK". You return to the Data Center menu.
8. Press
Clear (back arrow key) to return to Options menu.
Settings for Connecting to the Data Center