Pitney Bowes DM125 - Manual (Page 33)

3-5
3 • Running Mail
SV62276 Rev. A
Using the Weighing Platform (Scale)
1. Make sure scale is activated (you will see “0lb. and 0.0oz” next
to the "Scale" on the display). See Chapter 7, System Options to
turn your scale on if necessary.
2. Place mail piece on scale. The weight of the mail piece will ap-
pear on the top-line of the display and valid classes and rates for
this weight are displayed.
0 lb 2.3 oz
◄1st Class $2.67
◄Priority $3.85
◄Pkg Service
3. Select the desired class by pressing the key next to the class
name (use the scroll keys to see additional classes).
i NOTE: If you are unsure if a particular class is valid for your
mail piece, call your local post office or visit www.USPS.com.
4. If there is no value next to the class name, more information is
needed. Follow the prompts for the options and/or services avail-
able for this class of service. The last screen shows "Services"
and lists special services such as COD and Insurance.
5. Select "Done" when finished entering all the class options and fees.
7. Place the envelope up against the
registration wall of the system and
slide it to the right until the system
grasps it. The system prints the me-
ter stamp and ejects the envelope/
tape sheet.
6. If using the moistener, place flap
along moistener and move towards
the right.
Applying Postage