Pitney Bowes DM125 - Manual (Page 146)

10-4
10 • Maintenance
SV62276 Rev. A
1. Check the moistener tank to see how much sealing solution is
left.
3. If the tank was empty, allow 30 minutes for the moistener
brush and wick to get completely wet.
Check Level Here
Fill Here
Filling the Moistener
Refer to the following procedure to refill the moistener.
2. Add enough E-Z Seal ® to bring the sealant level up to the bottom
of the fill hole. We recommend E-Z Seal because it helps keep
your moistener clean and improves sealing efficiency. See Chap-
ter 12, Supplies and Options for part numbers to order this item.
IMPORTANT: Do not overfill the moistener tank.