Polycom WEBCOMMANDER 8 - Manual (Page 353)

MGC WebCommander User’s Guide
10-67
IVR Service
Name If you have enabled the IVR Service, enter the name
of the IVR Message Service to be used for this
conference. The IVR Message Service includes the
voice prompts that are played when the participant
enters the IVR queue, and enables operations during
the conference.
If left blank, the default IVR Service will be used if an
IVR Service was set as default.
Start Conf.
Requires
Chairperson This check box is enabled if the IVR option is selected
from the IVR dropdown box. Indicates that the
conference will only start when the participant defined
as a Chairperson connects to the conference.
When the check box is cleared, the conference will
start at its predefined time or when the first participant
connects to it.
Terminate After
Chairperson
Exits This check box is enabled if the IVR option is selected
from the IVR dropdown box. Terminates the
conference once the conference Chairperson
disconnects from the conference.
Mute “Meet Me”
Parties Select this check box to automatically mute all the
dial-in participants once they are connected to the
conference.
Lock Select this check box to lock the conference and
prevent dial-in participants from joining the conference
once the conference is started. Clear this check box to
unlock the conference and allow dial-in participants to
join the conference. A locked conference can be
unlocked during the On Going conference.
On Hold Select this check box to place the conference on hold.
While in the On Hold state, all participants hear
background music played by the MCU.
Table 10-15: Audio Only–Advanced Conference Options
Option Description