Polycom WEBCOMMANDER 8 - Manual (Page 331)

MGC WebCommander User’s Guide
10-45
In conferences where the Video Layout is set to “Auto Layout" the
system automatically selects the conference layout based on the number
of participants connected to the conference. With Auto Layout, when a
new video participant is connected/disconnected, the conference layout
automatically changes format to reflect the new number of video
participants. Audio Only participants do not affect the selected layout.
Auto Layout must be enabled for the MCU running the conference in the
MGC Manager. For more details, see the MGC Manager Administrator’s
Guide, Chapter 5 “Edit system.cfg.
Table 10-9 describes the layout that will be automatically selected by the
system according to the Continuous Presence mode and the number of
participants.
10+
Quad Views mode
Note: This window is only available in the Quad Views
mode.
Table 10-8: Video Sources Layout Views
Number of
Video
Windows
Available Layouts
Table 10-9: Default Auto Layout for CP Classic and Quad Modes
Number of Video
Participants Selected Layout for
Classic CP Selected Layout for
Quad Mode CP
2
1x1
1x1
3
1x2
1x2
4
2x2
2x2