Polycom WEBCOMMANDER 8 - Manual (Page 322)

Chapter 10 - Conference Templates – Full Parameters View
10-36
Mute “Meet Me”
Parties Select this check box to automatically mute all dial-in
participants once they are connected to the
conference. The participants can then be individually
un muted by the operator or the conference
chairperson.
Note:
This option is available only when the Audio+ card is
installed with the MCU.
Lock Select this check box to lock or unlock a conference
to dial-in participants once the conference is started.
Clear this check box to unlock the conference and
allow dial-in participants to join the conference. A
locked conference can be unlocked during an On
Going conference.
On Hold Select this check box to place the conference on
hold. While in the On Hold state, all the participants
hear the music played by the Audio+ card.
Clear this check box to reinstate the conference.
A conference on hold can be released and placed on
hold during an On Going conference.
Note:
This option is available only when the Audio+ card is
installed with the MCU.
Enable Invite Select this check box to enable the Invite
functionality with an enabled IVR service. When
selected, participants in the conference can invite
new participants during the On Going conference.
Note:
This option is enabled only for Audio Only
conferences with an enabled IVR service and only
during the conference definition stage. It cannot be
enabled while the conference is running.
Table 10-4: Advanced Conference Parameters
Option Description