Polycom WEBCOMMANDER 8 - Manual (Page 347)

MGC WebCommander User’s Guide
10-61
Numeric ID A Numeric ID can be assigned in two ways: Automatic
or Manual.
Manual - Use the number of digits defined in the
appropriate flag in the System.cfg file.
If the Numeric ID is already in use in another Entry
Queue or a conference, an error message is
displayed.
Automatic - If the operator does not manually assign
the Numeric ID, the MCU assigns one after the
completion of the Entry Queue definition. The
assignment is done once, when the Entry Queue is
saved on the MCU.
Note:
If the MCU is configured to support only Automatic
assignment of Numeric Conference IDs, this field is
disabled and the system automatically assigns a
Numeric Conference ID after you save the Entry
Queue on the MCU.
Conference
User 1-3 There are 3 User Defined fields that enable you to
enter general information for the conference, such as
the company name, the contact person name, the
contact person’s E-mail address or telephone number,
or any other required information.
Note:
The titles of the User Defined fields can be modified in
the Database Manager -> Defaults -> User Defined
Defaults and they can only be loaded to the MGC
Manager application.
The User Defined fields are displayed only if the Show
User Defined Fields in Conference Parameters box is
selected in the Database Manager -> Defaults ->User
Defined Defaults.
Table 10-14: Audio Only General Conference Parameters
Option Description