LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 59)

45
Using the Main Menu
To configure PTZ settings:
1 From the Device menu, click PTZ.
2 Configure the following according to your
PTZ camera’s specifications:
• Channel: Select the channel the PTZ
camera is connected to.
• Protocol: Select from Pelco-D or Pelco-P
• Bauder rate: Select the PTZ camera’s
baude rate
• Data Bits: Select from 5~8 data bits.
• Stop Bits: Select from 1 or 2 stop bits.
• Parity: Select from None, Odd, Even, Mark
or Space.
• Cruise: Select On to enable PTZ cruise.
• Address: Enter the PTZ camera’s address
Use the Copy To drop-down menu to
copy the PTZ settings to multiple
channels.
3 Click Apply to save your settings.
Configuring mobile connectivity
settings
To remotely view your DVR using a
mobile device, you must port forward
the mobile port (by default port 1025) to
your router, and enter the mobile port
number in the DVR.
To configure mobile connectivity
settings:
1 From the Device menu, click Mobile.
2 Enter a new user name and password if
you want to change your mobile login
password. By default, the user name is
admin, and the password is 0000.
• The default Mobile port is 1025. This must
be port forwarded on your router to enable
remote access.
3 To change the Mobile port, click the field
beside Server Port to enter a new port.
PTZ
Mobile