LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 133)

119
Appendix L: Replacing the Hard Drive
Replacing the Hard Drive
To replace the hard drive:
1 Place the new drive in the housing. Note that the hard drive must be installed upside down on
the 4/8 channel models only.
2 Reconnect the power and data cables. Each cable can only be connected one way.
3 Replace the cover, tucking the lip of the cover at the front panel.
4 Replace the screws on the side and rear panels of the cover.
Formatting the Hard Drive
If you replace the pre-installed hard drive, it must be formatted in order to function
properly with the system.
To format the hard disk:
1 Right-click in the main viewing window, and then click Main Menu>Device > HDD.
2 Click the checkbox under Select to choose the drive you wish to reformat.
3 Click Format HDD.
4 When the warning window appears, click OK. Wait for the system to format the hard drive.
NOTE: You will notice that the size of the HDD and the free space are not the same. The system uses a
portion of the disk space for the operating system and initialization. This is common in all security DVRs
as well as common PC hard drives.
ATTENTION : Formatting the HDD erases all data on the hard disk.
This step cannot be undone.
Select checkbox