LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 164)

150
Troubleshooting the video display
Manually setting the DVR output mode
You can set the DVR to always output to the VGA port by manually configuring the output
settings.
To manually adjust the output settings:
1 Right-click and click Main Menu.
2 Click Advanced>A/V Setup.
3 In the Output Device drop-down menu, select VGA.
NOTE: In the 16-channel model, select VGA in the Init DEV drop-down menu.
4 Click Apply to save your settings.
Select VGA
4/8 Channel
Select VGA
16 Channel