Kentrox AI296 - Manual (Page 291)

AI296 Version 9.8x User’s Guide
AI296 Commands: diag-eth
9-33
This example displays Ethernet diagnostic help information.
This example displays the help associated with the Ethernet diagnostic filter
command.
[296]diag-eth
help
Commands for diag-eth:
interpret Turn on data interpretation.
quit Exit diag-eth.
help Display this help text.
data Toggle uninterpreted data display.
timestamp Toggle data timestamping.
go Begin data capturing.
stop Terminate data capturing.
filter Add a data filter.
promiscuous Toggle promiscuous mode for the ethernet chip.
[296]diag-eth
filter
Usage: FILTER [SRC ] [DST ]
FILTER [SRC ] [DST ]
FILTER [SRC ] [DST ]
FILTER [SRC <*#port>] [DST <*#port>]
FILTER PROTOCOL
FILTER ALL
FILTER LIST
Where:
is the MAC address desired, with the format
XX:XX:XX:XX:XX:XX, with each 'X' representing
a hexidecimal digit.
is the desired IP address, with the format
X.X.X.X, where 0 < X < 256.
is the desired TCP port.