Kentrox AI296 User Manual
Page 213
AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Call Routing
8-9
8. (optional) For
Call Data
, enter the call user data.
Call data is dependent on the type of SLC being used. It may be directly entered
as an alias macro.
9. (optional) For
Caller's Protocol
, enter the caller’s protocol type.
For more information about protocol types, refer to
10. (optional) For
Called Protocol
, enter the called protocol type.
For more information about protocol types, refer to
11. For
Display Alias in Destination Menu
, select
Yes
or
No
.
This setting specifies if the alias will appear in the welcome screen.
12. For
Alias Location
, select
Beginning
or
End
to place the alias at the beginning or end
of the alias table.
13. Select
to save the changes.
14. Repeat this procedure for additional alias configurations.
Arranging Aliases in the Alias Table
To arrange aliases in the alias table:
1. From the AI296 Main Menu, access the Alias Menu. The Alias Summary Menu
appears:
Alias Summary Menu
Find alias:
[Add Alias]
[Sort]
+ alias4 [Move] [Delete]
+ alias2 [Move] [Delete]
+ alias1 [Move] [Delete]
+ alias3 [Move] [Delete]
Range: {255 characters}