Kentrox AI296 - Manual (Page 139)

AI296 Version 9.8x User’s Guide
Link Configuration: General PPP Properties Configuration
6-45
Configuration in the AI296 Local Menu System
1. Access the AsyncPPP or SyncPPP Link Menu.
2. Select PPP Configuration Menu . The PPP Configuration Menu appears.
3. For Maximum Receive Unit , enter the byte value. The defaults are 1518 for network
control protocol BCP and 1500 for network control protocol IPCP .
4. For Maximum Transmit Unit , enter the byte value. The defaults are 1518 for network
control protocol BCP and 1500 for network control protocol IPCP .
This example displays Maximum Receive Unit set to 1000 and Maximum Transmit Unit set to
900 for an IPCP network control protocol.
Network Control Protocol
Description
This menu item defines the network control protocol as BCP or IPCP. BCP configures,
enables, and disables bridge protocol modules on both ends of a PPP link. IPCP
configures, enables, and disables IP protocol modules on both ends of a PPP link.
Menu Item Type
Toggle
Link Type Availability
AsyncPPP and SyncPPP
PPP Configuration Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 3
Network Control Protocol . . . . . . . . . . . . . . . . . . [IPCP] BCP
IPCP Address Parameters
Local IP address . . . . . . . . . . . . . . . . . . . . . . ....... 0.0.0.0
Remote IP address . . . . . . . . . . . . . . . . . . . . . . ....... 0.0.0.0
Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . 255.255.255.240
Maximum Receive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Maximum Transmit Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 900