Kentrox AI296 - Manual (Page 270)

AI296 Version 9.8x User’s Guide
AI296 Commands: alarm
9-12
alarm
Description
This command:
z Displays a list of the alarm groups and the overall alarm severity
z Displays alarms for a specified alarm group or for a specified range of severity
levels within an alarm group
z Displays alarms by severity level or for a specified range of severity levels
z Clears all non-self-clearing alarm groups and the overall alarm severity
z Clears a specified non-self-clearing alarm group
z Masks a specified alarm group
z Unmasks a specified alarm group.
Command Type
shell
Formats
alarm
group [ range ]
-sev [ range ]
-clear [ group ]
-mask group
-unmask group
Parameters
group Defines the group of alarms to display, clear, mask, or unmask. Valid
values are existing alarm groups. The following parameters is accepted:
range —Defines a range of alarm severity levels to display. Valid
values are 1 to 32 . Individual values in the range are separated by
hyphens ( - ).
-sev Displays all alarms or a range of alarms based severity level. The
following parameters is accepted:
range —Defines a range of alarm severity levels to display. Valid
values are 1 to 32 . Individual values in the range are separated by
hyphens ( - ).