Kerio Tech Firewall6 - Manual (Page 364)

Chapter 24 Kerio Clientless SSL-VPN
364
Click Advanced to open a dialog where port and SSL certificate for SSL-VPN can be set.
Figure 24.2 Setting of TCP port and SSL certificate for SSL-VPN
SSL-VPN’s default port is port 443 (standard port of the HTTPS service).
Click Change SSL Certificate to create a new certificate for the SSL-VPN service or to import
a certificate issued by a trustworthy certification authority. When created, the certificate is
saved as sslvpn.crt and the corresponding private key as sslvpn.key. The process of cre-
ating/importing a certificate is identical as the one for WinRoute’s interface or the VPN server,
addressed in detail in chapter 11.1 .
Hint
Certificates for particular server name issued by a trustworthy certification authority can also
be used for the Web interface and the VPN server — it is not necessary to use three different
certificates.
Allowing access from the Internet
Access to the SSL-VPN interface from the Internet must be allowed by defining a traffic rule
allowing connection to the firewall’s HTTPS service. For details, see chapter 7.4 .
Figure 24.3 Traffic rule allowing connection to the SSL-VPN interface
Note: If the port for SSL-VPN interface is changed, it is also necessary to modify the Service
item in this rule!