Kerio Tech Firewall6 - Manual (Page 114)

Chapter 8 Configuration of network services
114
Figure 8.11 DHCP server — reserving an IP address
Any IP address included in a defined subnet can be reserved. This address can but does not
have to belong to the scope of addresses dynamically leased, and it can also belong to any
scope used for exceptions.
IP addresses can be reserved for:
• hardware (MAC) address of the host — it is defined by hexadecimal numbers separated
by colons, i.e.
00:bc:a5:f2:1e:50
or by dashes— for example:
00-bc-a5-f2-1e-50
The MAC address of a network adapter can be detected with operating system tools
(i.e. with the ipconfig command) or with a special application provided by the net-
work adapter manufacturer.
• host name — DHCP requests of most DHCP clients include host names (i.e. all Windows
operating systems), or the client can be set to send a host name (i.e. Linux operating
system).
Click Advanced to set DHCP parameters which will accompany the address when leased. If the
IP address is already included to a scope, DHCP parameters belonging to the scope are used
automatically. In the Lease Reservation dialog window, additional parameters can be specified
or/and new values can be entered for parameters yet existing.
Note: Another way to reserve an IP address is to go to the Leases tab, find the IP address leased
dynamically to the host and reserve it (for details, see below).