Assigning a phone number (msn), Assigning a receive msn, Assigning a send msn – Siemens CX203isdn User Manual
Page 95
94
System settings
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005
Assigning a phone number (MSN)
You can assign particular individual phone numbers (MSN's) to registered terminals.
When doing this determine
◆
which phone number makes a registered terminal ring (receive MSN),
◆
under which number an internal user dials (send MSN).
Assigning a receive MSN
As supplied, a newly registered handset will ring whenever a phone number you have
set up is dialled.
If you only want to assign the terminal specific receive MSNs:
Assigning a send MSN
You can define one send MSN per internal user. This MSN is shown to the person you
call and the call is also charged to this MSN.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user
Select the menu item and confirm.
s
Setup device
Select the menu item and confirm.
s
INT11: Int.11
W
Select internal number of the terminal and open the
submenu, e.g. INT11: Int.11.
s
Receive MSN
Select the menu item and confirm.
s
Select MSN and confirm, e.g. MSN1: Anna
(
‰ = set).
Repeat the procedure for further MSNs.
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user
Select the menu item and confirm.
s
Setup device
Select the menu item and confirm.
s
INT11: Int.11
Select internal number, e.g. INT11: Int.11.
W
Press the display key to open the submenu.
s
Send MSN
Select the menu item and confirm.
s
MSN1:
Select MSN and confirm, e.g. MSN1: Anna
(
‰ = set).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK
OK