Siemens CX203isdn - Manual (Page 21)

20
Making calls
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005
Calling a specific handset
Starting a group call to all internal users
You can make a group call from your base station to all other registered internal users
entered for group calls (page 102). By factory default, this option is activated.
The first internal user who answers the call is connected to you.
c
Lift the receiver.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] INT
Press the display key to initiate the internal call.
either ...
~
Enter the number of the internal user you want.
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] LIST Press the display key.
s
INT11: Int.11 Select and confirm the internal number you want,
e.g. INT11: Int.11.
... then End the call:
a
Replace the receiver.
OK
i
◆ If Dial handsfree is activated (page 101), you can also dial and make
calls without lifting the receiver. Dial the number and handsfree mode
is activated.
◆ If you have previously assigned a function key accordingly (page 114),
you can also use that function key to dial.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] INT
Press the display key to initiate the internal call.
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR] LIST
Press the display key.
s
Collective call Select the menu item and confirm.
or ...
P Press the star key.
OK