Siemens CX203isdn - Manual (Page 44)

43
Making cost-effective calls
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005
Making cost-effective calls
Sign up with a network provider who offers particularly low-cost call rates (call-by-call)
or view the call charges on the base station. You can use the speed dial list to manage
your call-by-call numbers.
Linking a call-by-call number with a phone number
This function can be used to put a network provider's prefix in front of the telephone
number ("linking").
Call duration display
When you are called, the call duration is automatically displayed in the display.
If you call someone else, the call duration is displayed until the call charge display is
transferred. (Precondition: You have asked your network provider to transfer the call
charges.)
When the call is ended, the call duration display stops. It remains for
approximately 3 seconds before the handset goes into idle status.
i
You can manage entries in the speed dial list in exactly the same way as
entries in the Phonebook. You will find instructions on storing, editing
and deleting entries starting on page 34.
Ÿ Open the speed dial list.
s
W Select entry and open the submenu.
Display Number Confirm.
either ... Enter the telephone number:
~
Enter the telephone number.
or ... Select a number from the Phonebook:
h s
Open the Phonebook, select an entry and confirm.
... then
c
Lift the receiver. The number is dialled.
OK
OK
i To make this function easier to use, you can also set one of the function
keys accordingly (page 114).