Siemens CX203isdn - Manual (Page 72)

71
Operating the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005
Introduction to remote operation while you are away from home
For remote control you need a telephone that transmits DTMF tones (tone dialling). It is
important to enter the AM PIN immediately while the announcement is being played. In
addition Remote control and, if required, Remote delete must be activated.
If the AM PIN is entered three times incorrectly in succession, the connection is
interrupted.
After this you can operate the answering machine using the key commands (page 72).
Introduction to remote operation from a handset (internal)
Added-feature and standard handset
Handset made by another manufacturer (GAP mode)
Lift the handset and if necessary, press another key to initiate an internal call.
Cordless phone adapter and normal telephone
Automatic line seizure must be activated. As supplied, automatic line seizure is
activated!
Lift the receiver and then:
~
Dial your own telephone number.
~
When the announcement starts, enter the AM PIN at
once.
[RRRRRRRRRRRRRRRRRRRRRRRRRR] INT
Press the display key.
~
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
~
If the AM lock has been set (page 78), enter the
AM PIN.
~
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
~
If the AM lock has been set (page 78), enter the
AM PIN.
~
Enter internal phone number for the answering
machine: 91 for AM1, 92 for AM2 or 93 for AM3.
~
If the AM lock has been set (page 78), enter the
AM PIN.