Activating/deactivating automatic pause, Locking the answering machine, defining am pin, Entering and changing the am pin – Siemens CX203isdn User Manual
Page 79: Activating/deactivating the am lock
78
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Activating/deactivating automatic pause
If automatic pause is activated the answering machine switches to pause mode after
playing back a message or memo. The next message will not be played back until you
press the
Ð
display key or the
ô key.
When the phone is supplied automatic pause is deactivated.
Precondition: You have selected an answering machine (page 61).
Locking the answering machine, defining AM PIN
You can protect your answering machine against unauthorised access. To do this, define
an AM PIN (Personal Identification Number) and activate the AM- lock. The settings may
then only be changed and the messages played back after the PIN has been entered.
Entering and changing the AM PIN
When supplied, the AM PIN is preconfigured to 0000.
Precondition: You have selected an answering machine (page 61).
If you make an error when keying in the AM PIN you can delete your entry using
the
ß key and enter it again.
Activating/deactivating the AM lock
When the phone is supplied the answering machine lock is deactivated.
Precondition: You have selected an answering machine (page 61).
s
Settings
Select the menu item and confirm.
s
Automatic pause
Select the menu item and confirm (
‰
= activated).
j
Hold down (back to idle status).
OK
OK
i
The answering machine can only be controlled remotely if you have
defined an AM PIN.
s
Settings
Select the menu item and confirm.
s
Change AM-PIN
Select the menu item and confirm.
~
Enter new AM PIN (max. 8 digits) and confirm.
~
Repeat the new AM PIN and confirm.
OK
OK
OK
OK
s
Settings
Select the menu item and confirm.
s
AM lock
Select the menu item and confirm (
‰
= activated).
OK
OK