Siemens CX203isdn - Manual (Page 75)

74
Setting the answering machine (on CX253isdn)
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005
Setting the answering machine
(on CX253isdn)
Once you have connected your telephone your answering machine is ready for use.
Answering machine AM1 is activated. It records all messages (on all receive MSNs).
AM1 can be played back and set from all handsets (factory default).
By default, AM2 and AM3 are not activated (page 75). To be able to use them you must
activate them and assign them their own receive MSN.
You can configure AM1, AM2 and AM3 separately.
Assigning a receive MSN
You can assign one or more receive MSN's to each (shown) answering machine (AM1,
AM2, AM3). However, each MSN can only be assigned to one answering machine (only
one recording can be running at any one time).
Once an answering machine has been assigned to a receive MSN it can only be set and
operated via handsets/terminals to which the same receive MSN is assigned.
i
Open the menu.
s
Set base Select the menu item and confirm.
s
Settings Select the menu item and confirm.
s
Setup user Select the menu item and confirm.
Setup device Confirm.
s
Select answering machine, INT 91: AM 91 for AM1,
INT 92: AM 92
for AM2 or INT 93: AM 93 for AM3.
W Open the submenu.
s
Receive MSN
Select the menu item and confirm.
s
MSN1:
Select the receive MSN and confirm, e.g. MSN1:
Anna
. Only the MSN's that are still not assigned to
an answering machine are offered.
Repeat this process for all receive MSNs you want to
assign to the answering machine ( ‰ = activated).
j
Hold down (back to idle status).
OK
OK
OK
OK
OK
OK