beautypg.com

128 appendix – Siemens CX203isdn User Manual

Page 129

background image

128

Appendix

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005

… the divert conditions are

not displayed for call

diversion?

Internal call diversion is

activated.

Activate external call diversion

(page 98).

Apply to have this activated by

the network provider.

… the telephone also rings for

fax-PC calls?

The phone number is in the

phone number list of the base

telephone.

Delete the corresponding

phone number (MSN) in the list

(page 93).

… the display shows no call

charges?

The call charge display is not set

or this performance feature is

not enabled by the network

provider.

Activate the call charge display

(page 44).

Request the performance

feature "charge transmission"

from the network provider.

… you cannot access the

answering machine?

The answering machine lock has

been activated.

Enter answering machine PIN

(page 78).

… you are unable to record

any new information or

announcements?

There is insufficient remaining

memory.

Delete old messages/

information (page 68).

Reduce the quality of the

recordings (page 77).

… you have a PABX and, after

dialling, the wrong

connection or no connection

is made?

You have entered the wrong

prefix or no prefix.

Check and correct the prefix

(page 124).

… some of the ISDN

functions do not work as

stated?

The ISDN function is not

enabled.

Check with your network

provider.

… another telephone on the

So bus does not ring?

The same MSN was assigned to

the telephones. One of the

telephones also has internal call

diversion activated.

Deactivate internal call

diversion or set external call

diversion (page 97).

… the caller hears the phone

ringing although the MSN is

busy?

The MSN was saved in devices

also used on the ISDN

connection.

The phone number which is

supposed to be used for call

protection during a call should

be deleted from the list of

phone numbers for each

individual additional device.

… the base station does not

receive the SMS as text?

You are not registered with both

SMS centres.

Register with SMS centres

(page 50).

What has happened

when …

Possible Cause

Possible solution

This manual is related to the following products: