beautypg.com

Text messages to a pabx, Errors when sending and receiving a text message, Errors when sending a text message – Siemens CX203isdn User Manual

Page 60

background image

59

SMS (text messages)

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005

Adding a text message sender's telephone number to the Phonebook

Precondition: You have opened the incoming message list and selected a message

(page 56).

Text messages

to a PABX

You can only receive a text message when the Calling Line Identification is

forwarded to the extension of the PABX (CLIP).
The CLIP of the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS

centre with an access code (this depends on your PABX). You can store the access code

on your base station (page 124).
If in doubt, you can test your PABX by sending a text message e.g. to your own number

and putting the access code before the number of the SMS centre. If you do not receive

the message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension

number. The recipient cannot reply to you directly in this case.

Errors when sending and receiving a text message

Errors when sending a text message

Text messages that cannot be sent are assigned an error status e.g. FD error: and are

stored in the incoming message list.
The following error codes are displayed:

W

Press display key to open menu.

s

Copy to dir.

Select the menu item and confirm.

s ~

Go to the Name line and enter the name

(max. 16-digits) (for entering text, see page 131).

W

Press display key to open menu.

Store

Confirm. The entry is stored.

j

Hold down (back to idle status).

OK

OK

i

You can create a special Phonebook for SMS within your main Phonebook

by putting an star (*) before the names.

Error code

Description

E0

Calling Line Identification is permanently deactivated (page 22).

FE

Error occurred during message transfer.

FD

Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an SMS

centre is missing or incorrectly stored. Check that the number of the

SMS centre has been correctly stored.

C3

Wrong recipient phone number

This manual is related to the following products: